Fluid Bed Equipments

Approx. Rs 19,60,000 / PieceGet Latest Price

• High performance
• Energy efficient
• Sturdy construction

Price Start from : $ 23000 to Depends on Capacity  

Approx. Rs 18,00,000 / PieceGet Latest Price

The PRISM Fluid Bed Coater cGMP Model offers an effective and efficient method for drying & pallet coating. It is invented keeping in mind the latest cGMP norms with all contact parts AISI 316 Quality. By using modular construction and simplified design we provide flexible installation. The Machine is vertical type, Electric Heated, PLC controls Auto Mode, Arrangement for Spraying an active ingredient on to the carrier bed for top spraying and suitable for efficient accurate and uniform drying wet granulated pharmaceutical solid powder at lower temperature

PROCESS

It works on the principle of air flow. 

Step 1  : Mixing: Dry mixing by fluidizing the material in the machine 

Step 2  : Granules Coating & Pallet Coating / WURSTER SYSTEM:

This process is used to apply a coating to the granules or pallets. This process is known as waster coater. In this process the spray is done inside a hollow cylinder and from the bottom of this cylinder the pallets are allowed in small quantity to enter the hollow cylindrical tube. Then the particles are passing the bottom spray guns on orderly manner quickly moving upward the tubes to avoid agglomeration. Once they are outside the wurster compartment, they move downward outside the compartment where they dry another layer of coating can be supplied. Since the movement of the particle or pallets inside the chamber totally controlled in ensures uniform coating. export attherate prismpharmamachinery dot com

Approx. Rs 7,40,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size

Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

Technical Specifications:

Approx. Rs 7,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size

Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

Approx. Rs 7,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Additional Information:

• Production Capacity: 1 kg to 500 Kg

Approx. Rs 7,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 9,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Additional Information:

• Production Capacity: 1 kg to 500 kg

Approx. Rs 9,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 9,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 95,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 8,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 2,55,000 / PieceGet Latest Price

• Precisely designed
• Uninterrupted operations
• Noiseless functioning

Approx. Rs 9,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 9,50,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 9,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 7,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity  

Approx. Rs 1,85,000 / PieceGet Latest Price

Approx. Rs 9,00,000 / PieceGet Latest Price

Application & Process:

• Prism Fluid Bed Dryer involves fast drying, cooling and agglomeration of particulate materials. It is ideal for heat sensitive and non heat sensitive products in Pharmaceuticals, Chemicals and Biochemical, Food and Dairy Industries.
• The Fluid Bed Dryer have a bed of solid particles which are fluidized by passing a stream of air upward through a specially designed perforated sheet.
• The upward velocity of air is so maintained so as to slightly lift the solid particles and set them in motion. This motion can be utilized to bring about mixing as well as forward movement of the solids particles.
• The air is heated and the process hot air evaporates the fluid and dries the solids. Fines get agglomerated to larger granules particles thus providing large size. export attherate prismpharmamachinery dot com

 Salient Features:

• Design is cGMP - Current Good Manufacturing Practices compliance
• All contact parts AISI 316 & non contact parts AISI 304
• Single piece construction with Integrated retarding expansion chamber cum filter bag housing
• Batch type dryer with available capacity 01 kg to 500 kg. Batch size
• export attherate prismpharmamachinery dot com
• Pneumatic Sealing of Filter Bag and Product container by inflatable silicon rubber tube
• Inlet Air handler with Air Filter- Micro, HEPA and Heat Exchanger Steam or Electric
• Exhaust air blower with dynamic balance fan
• Built in Explosion vents and isolation valve protect equipment
• Automatic Temperature controls for Inlet Air and Process cycle time controls
• Washable filter media, FDA approved
• Auto pneumatic filter bag shacking system
• Sampling pot on product container
• Electric and Pneumatic controls panel

 Price Start from : $ 12000 to Depends on Capacity